Brake Calipers - Honda V65 MAGNA Shop Manual

HYDRAULIC BRAKES
Place the master cylinder on the handlebar and
install the holder and the two mounting bolts.
Align the end of the holder with the punch mark
on the handlebar, and tighten the upper bolt first
then tighten the lower bolt.
TORQUE: 10-14 N'm (1.0-1.4 kg·m, 7-10 ft·lb)
Install the oil hose with the bolt and its two sealing
washers.
Install the brake lever.
Fill the reservoir to the upper level and bleed the
brake system according to page 17-4.
V65MAGNA
OIL HOSE BOLT
PUNCH MARK
BRAKE CALIPERS
REMOVAL
Place a clean container under the caliper and dis-
connect the brake hose from the caliper.
CAUTION:
A void spilling brake fluid on painted surfaces.
Remove the caliper bolt and pivot bolt.
Remove the caliper.
FRONT BRAKE HOSE PIVOT BOLT
CALIPER BOLT
REAR BRAKE HOSE
PIVOT BOLT
CALIPER BOLT
1
-10
294
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.