Honda V65 MAGNA Shop Manual page 162

V65MAGNA
Clean the crankcase mating surfaces.
Apply liquid sealant to the mating surface of the
lower and upper crankcase.
CAUTION:
Do not apply sealant to the area near the
main bearings.
DO NOT COAT THIS
AREA.
Install the dowel pin.
CRANKCASE
Assemble the crankcase halves, aligning the shift
fork claws with the gears.
Tighten the bolts to the specified torque values in
the sequence shown.
TORQUE VALVES:
10
mm bolt:
43-47
N·m
(4.3-4.7
kg-m,
31-34
ft-Ib)
8
mm bolt:
21-25
N·m
(2.1-2.5
kg-m,
15-18
ft-Ib)
6 mm bolt:
10-14
N·m
(1.0-1.4
kg-m,
7-10
ft-Ib)
Tighten the bolts in a crisscross pattern and in
2-3
steps.
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
161
11-5