Piston Inspection; Cylinder Inspection - Honda V65 MAGNA Shop Manual

HYDRAULIC BRAKES
PISTON INSPECTION
V65MAGNA
Check the pistons for scoring, scratches or other
faults. Measure the piston diameter with a micro-
meter.
SERVICE LIMIT:
FRONT: 31.940 mm (1.2575 in)
REAR: 30.140mm (1.1866 in)
CYLINDER INSPECTION
Check the caliper cylinder for scoring, scratches or
other faults. Measure the caliper cylinder bore.
SERVICE LIMIT:
FRONT: 32.09 mm (1.263 in)
REAR: 30.29 mm (1.193 in)
ASSEMBLY
If the piston boots are hardened or deteriorated,
replace them with new ones. Tth piston seals must
be replaced with new ones whenever they are
removed. Coat the seals with silicone grease or brake
fluid before assembly.
Install the pistons with the dished ends toward the
pads.
Install the collar boots and collar making sure that
the boots are seated in the collar and caliper grooves
properly.
Install the pad spring and pads.
17-12
PISTON
296
!
OIL SEALS PAD SPRING COLLAR
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.