Honda V65 MAGNA Shop Manual page 214

~HON'DA
CJ
V65MAGNA
PINION BEARING REMOVAL
Remove the O-ring from the pinion shaft.
DRIVE TRAIN
O-RING
Pull the outer and inner bearing races off the shaft
with the bearing puller.
Pull the remaining inner race off with the same tool.
Remove the pinion adjustment spacer.
PINION RETAINER OIL SEAL
REPLACEMENT
Remove the O·ring and oil seal from the pinion
retainer.
Drive a new oil seal into the retainer.
Coat a new O-ring with oil and install it onto the
retainer.
To install new oil seal, use driver 07945-3330300.
PINION BEARING
OIL SEAL
BEARING PULLER
(COMMERCIALLY AVAILABLE)
DRIVER
07749-0010000
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.
PINION RETAINER O-RING
213
ATTACHMENT
07945-3330300
14..9