Bearing Inspection/Selection - Honda CX500 1978 Shop Manual

a
HONDA
Press the crankshaft out by screwing in the
REMOVER.
Do not damage the bearing. when remov-
ROD SIDE CLEARANCE
INSPECTION
Install each connecting rod and bearing cap in
its original position and torque t o specifications.
TORQUE VALUE: 2.8-3.2 kg-m
(20-23 ft-lbsl
steps.
Do not rotate the crankshaft during
Measure the rod side clearance with a fj
gauge.
SERVICE
LIMIT: 0.60 mm (0.024 in)
BEARING INSPECTION/SELECTION
Inspect each bearing insert for separation or
other damage.
Put the connecting rod inserts in each rod cap.
Place a plastigauge strip across each rod crank-
pin avoiding the oil hole.
-
eeler
Date of Issue: January,
1981
O
HONDA MOTOR CO.,
LTD.