Side Stand - Honda V65 MAGNA Shop Manual

MAINTENANCE
SIDE STAND
Check the rubber pad for deterioration or wear.
Replace if any wear extends to wear line as shown.
Check the side stand spring for damage and loss of
tension, and the side stand assembly for freedom
of movement. Make sure the side stand is not
bent.
NOTE:
When replacing, use a rubber pad with the
mark "Over 260 Ibs ONLY".
Spring tension is correct if the measure·
ments fall within 2-3 kg (4.4-6.6 Ibl,
when pulling the side stand lower end with
a spring scale.
GOOD
o
V65MAGNA
NO GOOD
x
SUSPENSION
.' m ---,
Do not ride a vehicle with faulty suspension.
Loose, worn or damaged suspension parts
impair vehicle stability and control.
FRONT
Check the action of the front forks by compressing
them several times.
Check the entire fork assembly for leaks or damage.
Replace damaged components which cannot be
repaired.
Tighten all nuts and bolts.
Check the front fork air pressure when the forks
are cold.
PI ace the veh ide on its center stand.
Remove the air valve cap and measure the air
pressure.
AIR PRESSURE:
0-6 psi (0-40 kPa, 0-0.4 kg/cm
2
)
AIR VALVE CAP
3-16
44
Date of Issue: Dec, 1982
© HONDA MOTOR COl,LTD.