Honda V65 MAGNA Shop Manual page 187

TRANSMISSION
V65MAGNA
Remove the countershaft bearing holder bolts and
holder from the case.
Remove the output drive gear and shim.
Place the countershaft/holder in a press.
Press the countershaft out of the bearing holder.
COUNTERSHAFT BEARING
REPLACEMENT
NOTE:
The countershaft must be removed before
replacing bearing.
Place the bearing holder in a vise with soft jaws
or shop towel.
NOTE:
Do not damage the bearing holder, especially
the crankcase mating surface.
Unstake the outer race lock nut with a punch.
Remove the bearing outer race lock nut with a
special tool. Discard the lock nut.
BEARING HOLDER
~~~~~~~~r-'
13-6
186
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.