Names Of The Parts; Standard Specification - IAI ROBO Cylinder RCS2 Operating Manual

4.

Names of the Parts

The name of the actuator parts are indicated below.
In this manual, the left and right sides are indicated by looking at the actuator from the motor side in top
view.

4.1 Standard Specification

Rod Side
* The motor-reversing direction varies depending on the specification of the delivered product.
Caution: Even if you specified a robot cable, the cable extending from the actuator is not a robot
cable. Design an appropriate wiring layout so that this cable will not receive a flexing force.
The robot cable specification applies to the relay cable.
Right
Left
Rod
Rod-tip adapter Aluminum frame
Connector box Pulley cover
Base Motor bracket
Motor Side
3