6. SETTING
6.1. Recording Control Unit (NDV-1800/1850) setup
All setup items are set up with maintenance software.
Refer to the instruction manual of maintenance software for setup details
6.2. Digital Signal Converter (NCT-72/63) setup
All setup items are set up with maintenance software.
Refer to the instruction manual of maintenance software for setup details
1) Status display of dry contact signal
A junction board of DSC has green LEDs which shows status of each dry contact signals.
Check the change of state of dry contact signals by the display of LEDs.
• OPEN:
• CLOSE:
Green LED put out lights
Green LED lights up
JCY-1800/1850 VDR/S-VDR Installation Guide
99
6. Setting
DOC No. 7ZPJD0387C