Table of Contents
Advertisement
Freeway Range
Pro-Bel ltd
SWP or SWP?
Source using 525 trigger or pre-selected to be swapped
525 or 525?
Source using 525 trigger or
pre-selected
to use 525
6250r625?
Source using 625 trigger or pre-selected to use 625
• 7.4 Panel types
A description of all the panel types supported by Freeway are given in this
section.
Type 1
r
generic BPX panels
Existing Type 1 panels include 6280
(24BPS).
6284 (32 BPS) and 6286 (16
BPS).
6282
(24 BPS
+
4 level
breakaway)
and 628 5 (32 BPS
+
4 level
breakaway).
This panel type encompasses all BPX panels that conform to within the following
constraints
:
•
64 BPS keypad
•
8 destinations
•
8 level breakaway buttons
•
15 overrides
+
keyswitch input or
•
16 overrides (no keyswitch input)
The keypad buttons can be assigned as <SOURCE>, <SALVO>. <PROTECT> or <ALT
LEV> via the editor port.
This panel has two keypads associated with it - a source and destination keypad
which are assigned via the editor port.
Only BPS and BPO keypads
(l -
32
)
can be assigned to Type 1 panels. A single
button press is all that is required to set a crosspoint. No dial-up keypads are
supported.
Source associations are
assigned
on a
per
button basis while destination
associations are assigned to groups of 8 buttons, thus, for a 64 button BPX panel a
maximum of 64 source associations and 8 destination associations can be
assigned.
The destination associations for each group of 8 buttons are assigned to button
positions 1 - 8 of the assigned BPO keypad.
6540T-00 Nov 97
74
Advertisement
Table of Contents
