pro bel Freeway Manual page 73

Pro-Bel ltd Technical manual
7J,J,J,J,7
No source preselected on the most significant active
level but there are sources preselected on the lower
levels
/1111'7
No source preselected on the most significant active
level but there are sources preselected on the upper
levels
711J,J,7
No source preselected on the most significant active
level but there are sources preselected on the higher
and lower levels
The brightness of the displays on each panel may be changed by reconfiguring the
database. It is not possible to have different brightness levels for different
displays on the same panel.
The following table defines the AUD parameter symbols used on UMDS and panels
with 8 character displays when the display AUD parameters feature is enabled on
a level.
Symbol Description
space
Indicates normal source or destination
steady S Indicates destination is Swapped
steady M Indicates destination is Mono
flash Nand 7 Normal destination pre-selected
flash Sand? Swapped destination pre-selected
flash M and 7
Mono destination pre-selected
flashing L
Left channel of source routed to both channels
flashing R
Right channel of source routed to both channels
flashing S
Left and right channels swapped
NRM or NRM7
Source is Normal or pre-selected to be Normal
L-R or L-R?
Source is L-R or pre-selected to be L-R
R-L or R-L7
Source is R-L or pre-selected to be swapped
6540T-00 Nov 97
73