Insta Ilation; Emc Statement - pro bel Freeway Manual

Table of Contents

Advertisement

Freeway Range
Pro-Bel
ltd
have qualified personnel perform safety checks after any completed service
Cautions
use only specified replacement parts
the front door of the cabinet is part of the fire enclosure and should be kept
closed during normal operation.
this product should be powered only as described in the user guide
.
• 2.2 Installation
Any Pro-Bel equipment may be mounted next to other equipment provided it is
not subjected to excessive heat from that equipment. In order to maintain a cool,
internal temperature
,
make sure that the fans (if fitted) and vents on either side of
the equipment are unobstructed. Proper air circulation requires that both the fan
s
and vents have access to the ambient temperature room air mass .
• 2.3 EMC statement
General
Pro-Bel equipment has been tested against the European standards EN50081-1 and
-2. In all cases, the results depended
heavily
on the use of the correc t
cabl es
and
connectors, and their correct assembly. Precautions applicable to each common
signal type are specified below. Installation provisions must be followed in order
that compliance
is
maintained in
service.
Normal practice as regards pushing
cards fully home and ensuring that connectors ar
e well
seated is essential to good
EMe
performance.
6540T-00
l\Jov
97
8

Advertisement

Table of Contents
loading

Table of Contents