pro bel Freeway Manual page 81

Pro-Bel Ltd Technical manual
destination keypads are assigned then only 31 of the available source or
destination associations can be assigned.
The levels that can be controlled are assignable on this panel type.
The level buttons toggle on and off and operate in the same manner as other
panel types .
Crosspoint selection is detailed in the steps listed below:
1 Toggle <SID SELECT> button until LED to the right of the DESTINATION
display illuminates
2 Press the required destination buttons to select a destination association.
3 Activate/De-activate required levels
4 Toggle <SID SELECT> button until the LED to the right of the PRESET
display illuminates
5 Press the required source buttons to select a source association.
6 Repeat steps 3-5 until the required sources are preselected
7 Activate all levels on which crosspoints are to be set
8 Press the <TAKE> button
Salvos can only be dialled up from the source keypad . Part entry and single
keypress sequences can be used. Salvo selection is detailed in the steps listed
below:
1 Toggle <SI D SELECT> button until the LED to the right of the PRESET
display illuminates. The source keypad is now active.
2 Press the required source buttons to select a salvo
3 Press the <TAKE> button
A salvo take will override any restrictions in a panels list of controllable
destinations.
Route inhibits are obeyed.
Salvo takes do not override protected routes.
<LINE-UP>, <PROTECT>, <INCREMENT>, <DECREMENT>. <CONFIG-AUD> and
<DISPLAY-AUD> can be assigned to the four special function buttons on this panel
type.
6540T-00 Nov 97
81