Pro-Bel
ltd
Technical manual
Disposal
None of the active devices or other components in this unit contains any
hazardous or dangerous chemicals or substances and therefore there are no
special precautions that need to be observed if this equipment is disposed of.
High voltages
To prevent electrical shock when working on this equipment disconnect the a.c.
line cord from the a.c. source before working on any internal components.
ESD warning
WARNING:
All of the modules fitted contain static sensitive
components and full anti-static precautions should be taken when
handling them.
Warnings
•
heed all warnings on the unit and in the operating instructions
•
do not use this product in or near water
•
disconnect a.c. power before installing any options
•
route power cords and cables so that they are not easily damaged
•
disconnect power before cleaning
•
do not use liquid or aerosol cleaners; use only a damp cloth
•
dangerous voltages exist at several points in this product - to avoid personal
injury, do not touch exposed connections and components while the power is
on
•
do not wear hand jewellery or watches when troubleshooting high current
circuits, such as the power supply
•
to prevent damage to equipment when replacing fuses, locate and correct the
trouble that caused the fuse to blow before applying power
•
to avoid fire hazard, replace fuses only with the specified type, voltage and
current rating - always refer fuse replacement to qualified service personnel
•
to avoid explosion
,
do not operate this product in an explosive atmosphere
unless it has been specifically certified for such operation
•
during installation, do not use the door handles or front panels to lift the
equipment because they may open abruptly and injure you
6540T-00 Nov 97
7