pro bel Freeway Manual page 77

Pro-Bel Ltd Technical manual
Salvos are not destination association oriented. Selecting a <SALVO> button causes
all routes set up in that salvo to be made if they are not inhibited or protected.
Salvo takes ignore status of any <PROTECT> buttons on the panel.
The lamp in the <SALVO> button lamp is either lit for 5 seconds (indicates no error
in salvo take) or flashes for 5 seconds ( indicates error in salvo take) before
returning to the correct tally. This 5 second period can be overridden if a
<SOURCE>, <SALVO>, or <PROTECT> button is pressed in this time. In each
instance the <SALVO> button
lamp is extinguished and the correct tally indication is re-instated.
Selecting the same salvo from another panel does not cause an update of this
panel's <SALVO> button lamp.
16 assignable overrides and no keyswitch input or 15 assignable overrides plus
keyswitch input are supported. Overrides can operate on any source on any level.
If line-up is initiated from another panel then tally indications on Type 1 panels
will be updated accordingly.
Type 2, generic X-Y (lamps)
Existing Type 2 panels include 6281 (24xI2x4), 6283 (8x8), 6287 (l6xI6) and 6289
(8x8x4).
This panel type has a source and destination keypad associated with a different
group of buttons on the panel. This panel type encompasses all lamp driven X-Y
panels that conform to within the following constraints:
• 64 BPS keypad
• 32 BPD keypad
• 8 level breakaway buttons
• keyswitch input
• no overrides
The buttons associated with the keypads can be assigned as <SOURCE>, <SALVO>,
<PROTECT> or <ALT-LEV> via the editor port.
64x32 with fully married control and no breakaway is the largest X-Y panel
possible .
The source and destination keypads are assigned via the editor port.
6540T-00 Nov 97
77