pro bel Freeway Manual page 52

Table of Contents

Advertisement

Freeway
Range
Pro-Bel ltd
general remote port configuration
32 button per source keypads
32 button per dest keypads
8 off 8 char display, 9x4 destination dial-up keypad
8 off 8 char display, 9x4 source dial-up keypad
200 entry sequence nodes per keypad (key presses)
32
panel positions
32 panel names (8 char)
controllable destinations per panel per
multi-drop
port
controllable
levels
and brightness per panel per
multi-drop
port
16 source
overrides
per panel per
multi-drop
port
audio configuration per source per level
audio configuration per de
stination
per level
trigger method per source per level
Database mode
The controller uses the editable database when sw2_7 is in CONFIGURE mode and
uses the default database when sw2_7 is in FIXED mode.
When sw2_7 is in
CONFIGURE
position, changes made to the configuration of the
system via the editor port will be saved in the editable database. The controller
will use the editable database to effect changes to the router set-up.
When sw2_7 is in FIXED position, changes to the configuration via the editor port
will be saved in the editable database. The
default
database will be used to effect
changes
to
the router set-up.
Database transfer
A database transfer is only invoked by a DT command from the Editor port.
Database tran
sfer
will only occur from act
ive
to idle card.
A database tr
ansfer
includes a transfer of:
the editable database
tally table data for the number of destinations and levels configured
installed modules in the configured system
6540T-00 Nov 97
52

Advertisement

Table of Contents
loading

Table of Contents