pro bel Freeway Manual page 89

Pro-Bel Ltd Technical manual
Generic multi-output panels
Rules
Only Destination AUO parameters can be assigned from this panel type.
When OEST-IDENT activated the 8th character in STATUS displays shows AUO
parameter of the destination for the most significant active Freeway Analogue
Audio level in the system.
8th character in PRESET display normally shows AUO parameter of the pre­
selected source displayed for the most significant active Freeway Analogue Audio
level in the system. It is also used to show the pre-selected destination AUO
parameter.
Operation 1
Press <OISPLAY AUDIO> to enable audio parameters to be displayed (optional).
Clear PRESET display.
Press <CONFIG AUDIO> and select an AUO parameter. An 8 character name is
displayed in the PRESET display to indicate destination AUO parameter pre ­
selected.
Press <TAKE> to :­
• assign AUO parameter to destination
• update 8th character of STATUS display with combined source and destination
AUO parameter
• auto cancel config AUO parameters mode and blank PRESET display
Operation 2
Press <OISPLAY AUDIO> to enable audio parameters to be displayed (optional).
Dial up source in PRESET display.
Press <CONFIG AUDIO> and select an AUO parameter. The pre-selected AUO
parameter is displayed (flashing alternately with
'?')
in the 8th character of the
PRESET display.
6540T-00 Nov 97
89