pro bel Freeway Manual page 72

Freeway Range
Pro-Bel ltd
Panels with displays
These panels have alphanumeric displays for 8 character messages. The table
below defines warning messages used throughout the range.
Valid source selections are shown on PRESET or STATUS displays as defined by
the user. These will be shown as :
• SSSSSSSS for 8 character.
• PRESET warning messages are enclosed by? ..?
• STATUS warning messages are enclosed by <....>
Message Explanation
<No Dst>
No destination association selected
<No Src> No source selected because no destination assigned
for any level in destination association
<1-1-1-,1>
No destination assigned in the selected destination
association on the most significant active level but
there are destinations on the lower levels
.rrr.
No destination assigned in the selected destination
association on the most significant active level but
there are destinations on the upper levels
<
ii
1-1->
No destination assigned in the selected destination
association on the most significant active level but
there are destinations on the upper and lower levels
?No Src? Source association with no sources on any level has
been selected
LOCKED
Panel <TAKE> button and source buttons are disabled
via keyswitch input
<PROT> Source cannot be routed as destination is protected.
After a few seconds the panel name is displayed before
reverting back to showing the current source rou ted a
few seconds later
PROTECT? When flashing indicates that destination will be
protected on next take
6540T-00 Nov 97 72