pro bel Freeway Manual page 53

Pro-Bel Ltd Technical manual
Commands from the editor are only processed by the active controller. The idle
controller ignores all commands. A database transfer must be initiated to make
acti ve and idle configurations identical.
Messages on Editor screen will indicate database transfer progress.
To swap the active/idle status between two controllers press the RESET button on
the active card. The idle card now becomes the active card and vice versa.
Configurable features
See Terminal command set for terminal command set summary and detailed
descriptions of individual commands.
Default settings
When sw2_7 is in the FIXED position the fixed EPROM based database containing a
default configuration is used instead of the editable one. The default settings for
the various parameters are defined in the tables on the following pages.
6540T-00 Nov 97
53