Table of Contents
Advertisement
FreewayRange
Pro-Bel Ltd
Action:
E
=
Enable
destts)
D
=
Disable
destts)
The system needs to be RESET for changes to take effect.
Source overrides (PO)
Used to assign source overrides to a panel on a bus position.
Format: PO, bus no[,panel no)[,override-Ievel-source
)
bus no
:
1 or 2
panel no
:
1..16
override
:
override no
.
to assign override to (1..16)
level
:
1..8
source:
0..64 (0
=
disable override)
The override-level-source data entry is repeated for as many overrides that are
required, each one separated by a comma.
The override assignments do not pertain to RS422 levels.
The system needs to be RESET for changes to take effect.
Controlled levels/brightness (PL)
Used to assign controlled levels and brightness to a panel on a bus position.
Format
:
PL,bus no[,panel noll.controlled levels,brightness)
bus no:
1 or 2
panel no
:
1..16
controlled
levels:
list of controlled levels (each separated by a space)
brightness:
1..8 (only applicable to type 4 and 5 panel types).
6540T-00 Nov 97
108
Advertisement
Table of Contents
