Setting The Output H Start; Setting The Output H Stop; Setting The Output V Start - evertz HD2014 User Manual

HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
0 to 1079
5.1.2.35.

Setting the Output H Start

The Output H Start control determines where to place the selected portion of the input image onto the
output video raster. The Output H Start control defines the starting horizontal position for the video
content on the output image raster. The input image will be stretched to fill the width defined by Output
H Start and Output H Stop. Areas of the output image raster not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output H Start
0 to 1919
5.1.2.36.

Setting the Output H Stop

The Output H Stop control determines where to place the selected portion of the input image onto the
output video raster. The Output H Stop control defines the ending horizontal position for video content
on the output image raster. The input image will be stretched to fill the width defined by Output H Start
and Output H Stop. Areas of the output image raster that are not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output H Stop
0 to 1919
5.1.2.37.

Setting the Output V Start

The Output V Start control determines where to place the selected portion of the input image onto the
output video raster. The Output V Start control defines the starting vertical position for video content
on the output image raster. The input image will be stretched to fill the width defined by Output V Start
and Output V Stop. Areas of the output image raster that are not filled with video content will be filled
with the pre-defined panel colours.
VIDEO
Processing
Converter
Path 1
Scaler
Output V Start
0 to 1079
Page 5-22
To set the Output H Start control, enter a value between 0 and 1919
into the Output H Start field.
To set the Output H Stop control, enter a value between 0 and 1919
into the Output H Stop field.
To set the Output V Start control, enter a value between 0 and 1079
into the Output H Start field.
Revision 0.1
TM
FRONT PANEL OPERATION