Setting The Aes Output Source; Configuring The Input Channel Of The Aes Output Mixer; Figure 5-2: Architecture For Aes Outputs - evertz HD2014 User Manual

5.2.5.1.

Setting the AES Output Source

The HD201x AES outputs can operate in several different output modes. The 8x AES outputs (16
channels) can follow output mixers for Embedder 1, Embedder 2, Embedder 3, Embedder 4 or follow
the routing programmed by the AES output mixer. The operating mode is chosen using the Output
Source control.
Audio
AES Out
OutputSource
aesMixer
embedder1
embedder2
embedder3
embedder4
5.2.5.2.

Configuring the Input Channel of the AES Output Mixer

The HD201x supports 8x AES outputs. For the sake of brevity, only the output mixer for AES OUT 1,
channel 1 will be discussed in this manual. Controls for all other AES outputs operate in the same way.
Each AES output contains 2 channels of audio. Each output channel has an associated output audio
mixer. Figure 5-2 illustrates the architecture for the AES outputs. Each mixer has both an X input and a
Y input with associated gain and inversion controls. These X and Y inputs can be used to generate
mono-mixes if desired. For the sake of brevity, only channel selection, gain and inversion controls for
the X channel are described in this manual.
FRONT PANEL OPERATION
HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
Select AES Mixer, Embedder 1, Embedder 2, Embedder 3 or Embedder
4.

Figure 5-2: Architecture for AES Outputs

Revision 0.1
TM
Page 5-47