Setting The Type Of Deinterlacer; Setting The Film Detection Mode For The Deinterlacer - evertz HD2014 User Manual

5.1.2.8.

Setting the Type of Deinterlacer

The user can adjust basic operating mode for the video de-interlacing used in the video processors with
the De-Interlacer Type control. Options include Adaptive VT, Field Merge Only, Temporal Only.
Optimal performance is obtained when selecting Adaptive VT processing.
VIDEO
Processing
Converter
Path 1
Deinterlacer
Deinterlacer Type
adaptiveVT
fieldMergeOnly
temporalOnly
5.1.2.9.

Setting the Film Detection Mode for the Deinterlacer

The user can adjust basic operating mode for the film mode processor used in the video de-interlacer
with the Film Detection Mode control.
VIDEO
Processing
Converter
Path 1
Deinterlacer
filmDetectionMode
Auto
detect22Only
detect32and22
detect32Only
videoOnly
FRONT PANEL OPERATION
HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
When adaptiveVT is selected, optimal processing is achieved for all
types of video content using an advanced directional filter and fully
motion adaptive weighting process.
When fieldMergeOnly is selected, field 1 and field 2 are simply
meshed together when generating the de-interlaced video.
When temporalOnly is selected, a simple and non adaptive temporal
filter is used to generate de-interlaced video.
When set to Auto, the film mode detector will automatically search for
all embedded film mode sequences in the incoming video and
automatically perform "inverse telecine" processing as appropriate to
create progressive content. When no film mode sequence is found,
video mode processing will be activated to create progressive content.
When set to detect 32and22, the film mode detector will automatically
search for embedded 3:2 and 2:2 sequences in the incoming video
and automatically perform inverse 3:2 and 2:2 processing as
appropriate. When no 3:2 or 2:2 film mode sequence is found, video
mode processing will be activated.
When set to detect 22Only, the film mode detector will automatically
search for embedded 2:2 sequences in the incoming video and
automatically perform inverse 2:2 processing as appropriate. When no
2:2 film mode sequences are found, video mode processing will be
activated.
When set to detect 32Only, the film mode detector will automatically
search for embedded 3:2 sequences in the incoming video and
automatically perform inverse 3:2 processing as appropriate. When no
3:2 film mode sequence is found, video mode processing will be
activated.
When set to video only, the film mode detector is turned off and video
processing only will be used when de-interlacing incoming video.
Revision 0.1
TM
Page 5-11