Configuring The C-Bit For Aes Output; Configuring The Audio Pro Mode For Aes Output; Configuring Analog Audio Inputs; Configuring The Analog Audio Input Levels - evertz HD2014 User Manual

The following shows the inversion control for the X input of AES Out 1, Channel 1:
Audio
aesOut
Mixer
channel1x
inputInvert
Enable
disable
5.2.5.3.

Configuring the C-Bit for AES Output

Several static configuration bits (Audio C bit and Audio Pro Mode) for the AES outputs can be set.
Audio
aesOut
cBit
20 bit
24 bit
5.2.5.4.

Configuring the Audio Pro Mode for AES Output

The ForcePro mode control the audio pro mode for the AES output.
Audio
aesOut
forcePro
Don't force
Force
5.2.6.

Configuring Analog Audio Inputs

5.2.6.1.

Configuring the Analog Audio Input Levels

The HD201x has 4x analog audio inputs. For each analog audio input you can define the analog audio
dynamic range. For the sake of brevity, only the level for analog audio channel 1 will be described in
this manual.
Audio
analogIn
adcInputClipControl
Channel 1
25.4.dBu
19.4 dBu
FRONT PANEL OPERATION
HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
Select enable to invert the selected channel of audio and select
disable to pass through the selected audio channel.
Select 20 or 24 bit audio mode.
Select Don't Force or Force.
Select either 19dBU or 25dBU to match the incoming level for each
analog audio channel.
Revision 0.1
TM
Page 5-49