Displaying The Status Of The Channel Pairs; Configuring The Audio Embedders; Configuring The Input Channel Of The Mixer - evertz HD2014 User Manual

NOTE:
Deembedder 1 corresponds to the audio de-embedded from PATH1
Deembedder 2 corresponds to the audio de-embedded from PATH2,
Deembedder 3 corresponds to the audio de-embedded from PATH3
Deembedder 4 corresponds to the audio de-embedded from PATH4.
Audio
deembedder
Deembedder 1 to 4
SRCMode
ChannelPair 1 to 8
Auto
Bypass
Enable
5.2.2.

Displaying the Status of the Channel Pairs

The HD201x de-embeds 4 groups (16 channels) of audio from the video supplied to the input of each
processing path. The HD201x monitors the status of internal sample rate converters on a per channel
pair basis. For the sake of brevity, only the audio sample rate converter status for de-embedder 1,
channel pair 1 will be discussed in this manual. Sample rate converters for all other de-embedders and
channels pairs are monitored in the same way.
NOTE:
Deembedder 1 corresponds to the audio de-embedded from PATH1
Deembedder 2 corresponds to the audio de-embedded from PATH2
Deembedder 3 corresponds to the audio de-embedded from PATH3
Deembedder 4 corresponds to the audio de-embedded from PATH4.
Audio
Deembedder
Deembedder 1 to 4
Status
ChannelPair 1 to
ChannelPair 8
Pcm, Bypass
5.2.3.

Configuring the Audio Embedders

5.2.3.1.

Configuring the Input Channel of the Mixer

The HD201x embeds 4 groups (16 channels) of audio into the output video of each processing path.
Within the audio embedder audio routing, audio gain and audio inversion controls are supported on a
channel by channel basis. For the sake of brevity, only the controls for embedder 1, channel 1 will be
discussed in this manual. Audio embedding for all other embedders and channel pairs operate in the
same way.
FRONT PANEL OPERATION
HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
For each audio channel pair there is an audio sample rate converter
that can be enabled, disabled, or set to auto. It is recommended that
all audio sample rate converters remain in auto mode.
The SRC status will be displayed as Pcm or Bypass,
Revision 0.1
TM
Page 5-41