Setting The Luma Wideband Frequency Response; Enabling The Ntsc Setup Pedestal; Setting The Saturation - evertz HD2014 User Manual

HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
5.1.4.11.

Setting the Luma Wideband Frequency Response

When the Luma Bandwidth control is set to Wideband, this selects between a set of frequency
response curves with a +/- 4dB range. To set the Luma Wideband Frequency Response control,
enter a value between -6 to 6.
Video
AnalogOut
CompositeOut
lumaWidebandFreq
-6...6
5.1.4.12.

Enabling the NTSC Setup Pedestal

Composite NTSC analog video may have a 7.5 IRE pedestal while 4:2:2 SDI video does not. This
control, when set to On, will add the pedestal and re-scale the video accordingly. The setup pedestal
should not be present on composite video when operating in Japan.
Video
AnalogOut
CompositeOut
ntscPedestalSetup
On
Off
5.1.4.13.

Setting the Saturation

The Saturation control allows the user to adjust the saturation of the analog video output.
Video
AnalogOut
CompositeOut
saturation
0 to 1023
Page 5-34
-6 – 4.0 dB response curve
-5 – 3.3 dB response curve
-4 – 2.7 dB response curve
-3 – 2.0 dB response curve
-2 – 1.3 dB response curve
-1 – 0.7 dB response curve
0 + 0.0 dB response curve
1 + 0.7 dB response curve
2 + 1.3 dB response curve
3 + 2.0 dB response curve
4 + 2.7 dB response curve
5 + 3.3 dB response curve
6 + 4.0 dB response curve
Turns the NTSC Setup Pedestal On.
ON:
OFF: Turns the NTSC Setup Pedestal Off.
To set the saturation, enter a value between 0 and 1023 into the
saturation field. Setting the saturation Level to 512 (100% gain) is
neutral.
Level 0 corresponds to 0% gain.
Level 512 corresponds to 100% gain
Level 1023 corresponds to a 199.8% gain
Revision 0.1
TM
FRONT PANEL OPERATION