Setting The Chroma Level Control; Displaying The Detected Standard; Setting The Frame Tbc; Setting The Hue Control - evertz HD2014 User Manual

HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
5.1.3.6.

Setting the Chroma Level Control

This control sets the overall chroma level gain.
Video
AnalogIn
CompositeIn
ChromaLevel
-100 to 100
5.1.3.7.

Displaying the Detected Standard

The Composite In Detected Standard reports the standard that the composite video decoder has
detected.
Video
AnalogIn
CompositeIn
detectedStandard
525i5994,
625i50, unknown
5.1.3.8.

Setting the Frame TBC

The composite video decoder has an internal time base corrector that can be enabled or disabled. The
time base corrector should be enabled when dealing with poor quality analog video sources.
To set the Frame TBC, enter either enable or disable.
Video
AnalogIn
CompositeIn
frameTBC
Enable
Disable
5.1.3.9.

Setting the Hue Control

The hue of the decoded signal can be adjusted with the HUE control.
Video
AnalogIn
CompositeIn
Hue
-180 to 180
Page 5-28
To set the Chroma Level control, enter a value between -100 to 100
into the chroma level field.
Values will be 525i5994 or 625i50 or unknown.
When set to Enable the Frame TBC control will be enabled.
When set to Disable the Frame TBC control will be disabled.
To adjust the hue, enter a value between -180 to 180 into the hue field.
The units for this control are degrees.
Revision 0.1
TM
FRONT PANEL OPERATION