Engineering Menu Navigation Buttons; Hot Key Macros - evertz HD2014 User Manual

HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
4.4.

ENGINEERING MENU NAVIGATION BUTTONS

The HD201x has four front panel buttons that are used for navigating the engineering menu and system
control.
The COARSE button is used to increase the rate at which the user may scroll
COARSE:
through the device parameters. To activate the coarse functionality, press the
COARSE button. The front panel display will temporarily display a message
indicating "coarse enabled". The LED directly to the left of the COARSE button
will also illuminate. To disable the coarse functionality, depress the COARSE
button a second time. The front panel display will temporarily display a message
indicating "coarse disabled". The LED directly to the left of the COARSE button
will also turn off.
The BACK button is used when navigating the engineering front menu system.
BACK:
Pushing this button causes you to move back (up) one level in the engineering
menu structure.
The LOCK button is used to lock the HD201x front panel. Pushing the LOCK
LOCK:
button will lock the front panel and cause button pushes to be ignored. The LED
directly to the left of the front panel will illuminate when the front panel is locked.
Pushing any button on the front panel will cause the front panel to display a
message indicating that "push LOCK+ADV to Unlk". The LOCK + ADV button
must be held down together to un-lock front panel control.
This button is used when navigating the engineering front menu system. Press
SEL:
the SEL button when you wish to select a parameter or menu item.
4.5.

HOT KEY MACROS

The HD201x has eight (8) front panel HOT KEY MACROS. These buttons enable control macros to be
executed at the single touch of a button. To program these front panel macro buttons, the HD201x's
on-board web server must be used to create a system configuration file. Once this configuration file has
been created, it must be saved to the HD201x unit and activated using the front panel menu system.
Refer to the HD201x Web Tool Programming Guide for additional information on how to program these
control macros.
Page 4-6
TM
Revision 0.1
FRONT PANEL OPERATION