Configuring The Audio Tone Generator; Configuring The Audio Tone Generator Per Channels Delays; Misc Menu - evertz HD2014 User Manual

HD2014, HD2012, HD2011 Video Passport
1RU Multi-Path Video Converter, Frame Synchronizer and Decoder
Audio
analogOut
OutputSource
analogMixer
embedder1Ch1to8
embedder1Ch9to16
embedder2Ch1to8
embedder2Ch9to16
embedder3Ch1to8
embedder3Ch9to16
embedder4Ch1to8
embedder4Ch9to16
5.2.8.

Configuring the Audio Tone Generator

5.2.8.1.

Configuring the Audio Tone Generator per Channels Delays

The HD201x has an internal 8-channel audio tone generator.
The tone generator produces different 8 different fixed tones with the following assignment
Tone Gen Channel 1 is a fixed 1KHz tone
Tone Gen Channel 2 is a fixed 500 Hz tone
Tone Gen Channel 3 is a fixed 5 kHz tone
Tone Gen Channel 4 is a fixed 2.5 kHz tone
Tone Gen Channel 5 is a fixed 10 kHz tone
Tone Gen Channel 6 is a fixed 7.5k Hz tone
Tone Gen Channel 7 is a fixed 15 kHz tone
Tone Gen Channel 8 is a fixed 12.5 kHz tone
The delay for each of these 8 tones may be programmed individually.
Audio
toneGen
chDelay
Channel 1 to Channel 8
0.0ms
5.3.

MISC MENU

The MISC menu provides three options for configuring your network: IP Address, IP Default Gateway,
and IP Netmask.
Page 5-54
Select analog mixer to the have the analog audio outputs follow
the routing defined by the analog output mixer. Select one of the
other options to have the analog audio outputs follow the
embedded audio outputs.
Units of measure are audio samples (48 KHz sampling).
Select a value from 0 to 16383 audio samples.
Each audio sample is 48 KHz and therefore represents a delay of
0.02 ms. Therefore, 0 samples correspond to 0ms of delay and
16383 corresponds to ~ 314 ms of delay.
Revision 0.1
TM
FRONT PANEL OPERATION