Lenovo System x3300 M4 Installation And Service Manual page 75

Table 14. Network adapters (continued)
Description
QLogic 10Gb CNA
Brocade 10Gb dual-port CNA
Emulex 4 Gbps FC single-port PCIe HBA
Emulex 4Gbps FC dual-port PCIe HBA
Emulex 8Gb FC single-port HBA
Emulex 8Gb FC dual-port HBA
QLogic 8Gb FC single-port HBA
QLogic 8Gb FC dual-port HBA
6Gb SAS HBA Controller
Brocade 8Gb FC single-port HBA
Brocade 8Gb FC dual-port HBA
NetXtreme II 1000 express quad-port Ethernet adapter
Intel Ethernet dual-port server adapter I340-T2
Intel Ethernet quad-port server adapter I340-T4
Broadcom NetXtreme II dual-port 10GBaseT adapter
Intel X520-DA2 dual-port 10GbE SFP adapter
Brocade 4Gb FC single-port HBA
Brocade 4Gb FC dual-port HBA
Broadcom NetXtreme I quad-port GbE adapter
Broadcom NetXtreme I dual-port GbE adapter
Emulex 10 GbE virtual fabric adapter III
Emulex 10 GbE virtual fabric adapter III lite
• Depending on your server models, the server comes with an onboard RAID controller which provides
basic RAID levels 0 and 1 functionality. The server supports the following optional RAID adapters that you
can purchase for additional RAID support. For configuration information, see the documentation that
comes with the adapter or the ServeRAID documentation at http://www.lenovo.com/support.
Attention: Some cluster solutions require specific code levels or coordinated code updates. If the
device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution
before you update the code.
Attention: Static electricity that is released to internal server components when the server is powered-on
might cause the server to stop, which might result in the loss of data. To avoid this potential problem,
always use an electrostatic-discharge wrist strap or other grounding system when working inside the
server with the power on.
To install an adapter, complete the following steps:
1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on page 34.
2. Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables from the server.
Network Adapters
Option part
number
42C1800
42C1820
42C2069
42C2071
42D0485
42D0494
42D0501
42D0510
46M0907
46M6049
46M6050
49Y4220
49Y4230
49Y4240
49Y7910
49Y7960
59Y1987
59Y1993
90Y9352
90Y9370
95Y3762
95Y3768
.
Chapter 2 Installing optional devices
CRU part
number
42C1802
42C1822
43W7510
43W7512
42D0491
42D0500
42D0507
42D0516
68Y7354
46M6061
46M6062
49Y7949
49Y4232
49Y4242
49Y7912
49Y7962
59Y1992
59Y1998
90Y9355
90Y9373
9573766
95Y3766
61