Lenovo System x3300 M4 Installation And Service Manual page 61

Table 11. DIMM population sequence (memory-mirroring mode)
Number of installed
microprocessors
1
2
• When you install or remove DIMMs, the server configuration information changes. When you restart the
server, the system displays a message that indicates that the memory configuration has changed.
The following illustration shows the location of the DIMMs connectors on the system board.
To install a DIMM, complete the following steps:
Step 1. Read the safety information that begins on page "Safety" on page v and "Installation guidelines"
on page 34.
DIMM connector population sequence
3, 5
4, 6
3, 5
9, 11
4, 6
10, 12
.
Chapter 2 Installing optional devices
47