Lenovo System x3300 M4 Installation And Service Manual page 294

Step 3. Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention: Do not allow the server to fall over.
Step 4. Unlock and remove the left-side cover (see "Removing the left-side cover" on page 187).
Step 5. Remove the air baffle (see "Removing the air baffle" on page 189)
Step 6. Remove all fan assemblies (see "Removing the fan assembly" on page 261)
Step 7. Removing the exiting system board (see "Removing the system board" on page 277).
Step 8. Touch the static-protective package that contains the system board; then, remove the system
board from the package.
Step 9. Grasp the handles of the system board; then, carefully install the system board and make sure it
has aligned to the standoff as the illustration showed.
Step 10. Start the Setup utility and reset the configuration.
a. Set the system date and time.
b. Set the power-on password.
c. Reconfigure the server.
See "Using the Setup utility" on page 93.
Step 11. Either update the server with the latest RAID firmware or restore the pre-existing firmware from a
diskette or CD image (see "Updating the firmware " on page 89).
Step 12. Update the UUID (see "Updating the Universal Unique Identifier (UUID)" on page 109).
Step 13. Update the DMI/SMBIOS (see "Updating the DMI/SMBIOS data" on page 111).
Step 14. If you are instructed to return the system board, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Step 15. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the
installation" on page 83.
280
System x3300 M4 Installation and Service Guide