Daikin E-Series Service Manual page 247

Instruction
2.3.5 Adjusting the Air Flow Direction
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase
your comfort.
To adjust the horizontal
blade (flap)
1. Press "SWING button".
• " " is displayed on the LCD and the
flaps will begin to swing.
2. When the flap has reached the
desired position, press
"SWING button" once more.
• The flap will stop moving.
• " " disappears from the LCD.
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle
• Unless "SWING" is selected, you should set the
flap at a near-horizontal angle in HEAT mode and
at a upward position in COOL or DRY mode to
obtain the best performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
12
234
HEAT
COOL/
DRY
SiAU18-715
1, 2
Operation Manual