Daikin E-Series Service Manual page 137

Indoor Unit (SkyAir Models)
Mode Conflict [Overview]
While the indoor unit for another room and the outdoor unit are operating, when the indoor unit
for the own room is activated, the operation mode which can be selected in the own room has
some restrictions as mentioned below.
i)
ii)
Outdoor unit
operation mode
when an operation
mode for the own
room is selected.
(The outdoor unit
is operated in the
mode as
mentioned below.)
Cooling
Heating
Blowing
× : Non-operational
* Operation of the indoor unit for the own room during non-operation.
•
•
•
•
Note: During automatic operation, at the time of changing operation mode to Automatic cooling
or Automatic heating, the unit is operated as the table shown above.
124
In case an priority for operation mode selection is given to the own room by setting the dip
switch of outdoor unit;
→
The own room can be operated in any mode.
In case an priority for operation mode selection is not given to the own room by setting the
dip switch of outdoor unit;
→
The unit can be operated as follows:
Cooling or
Automatic cooling
(Note)
:Operational ∗: The unit for another room is switched into non-operational condition.
Fan = OFF
Louver = becomes horizontal position.
ON LED on the remote controller = blinks.
Indication of "under central control" on the remote controller = displayed.
Operation mode selected in the own room
Dry
× ×
SiAU18-715
Heating or
Blowing Automatic heating
(Note)
×
×
∗
Function