Daikin E-Series Service Manual page 155

Field Setting
Push the SET button and match with the LEDs No. 1 - 15, push the RETURN button, and
confirm the data for each setting.
★
ways of expressing are as follows:
★
142
Data such as addresses and number of units is expressed as binary numbers; the two
The No. 1 cool/heat unified address is expressed as a binary
9 797997 number consisting of the lower 6 digits. (0 - 63)
16 4 1
32 8 2
In
16 + 4 + 2 = 22 (base 10 number). In other words, the address is
22.
977 7979
The number of terminal blocks for No. 12 and 13 is expressed as
64 16
an 8-digit binary number, which is the combination of four upper,
No.12 128 32
and four lower digits for No. 12 and 13 respectively. (0 - 128)
977 7997
In
4 1 0110, and the combination of the two is 01010110 (binary
No.13 8
2
number), which translates to 64 + 16 + 4 + 2 = 86 (base 10
number). In other words, the number of terminal block is 86.
See the preceding page for a list of data, etc. for No. 0 - 25.
the address is 010110 (binary number), which translates to
the address for No. 12 is 0101, the address for No. 13 is
SiAU18-715
Test Operation