Daikin E-Series Service Manual page 204

SiAU18-715
To 3-D Airflow
1. 3. Press the "SWING button
the "
move in turn.
To cancel 3-D Airflow
2. 4. Press either the "SWING button
Notes on louvers angles
ATTENTION
• Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is rotating at a
high speed.
Notes on flap angle
• When "SWING button" is selected, the flaps swinging
range depends on the operation mode. (See the figure.)
Three-Dimensional (3-D) Airflow
• Using three-dimensional airflow circulates cold air,
which tends to collected at the bottom of the room, and
hot air, which tends to collect near the ceiling,
throughout the room, preventing areas of cold and hot
developing.
ATTENTION
• Always use a remote controller to adjust the flaps angle.
If you attempt to move it forcibly with hand when it is
swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the air
outlet, fan is rotating at a high speed.
Operation Manual
" and " " display will light up and the flap and louvers will
" and the "SWING button
" or the "SWING button
In COOL or DRY mode
STOP
COOL
approx. 10°~40°
DRY
approx. 5°~35°
In HEAT or FAN mode
STOP
HEAT
approx. 15°~55°
FAN
approx. 5°~55°
Instruction
":
".
191