Daikin E-Series Service Manual page 198

Hide thumbs Also See for E-Series:
Table of Contents

Advertisement

SiAU18-715
To set the clock
1. Press "CLOCK button".
is displayed.
blinks.
2. Press "TIMER setting button"
to set the clock to the present
time.
Holding down "
idly increases or decreases the time dis-
play.
3. Press "CLOCK button".
blinks.
Turn the breaker ON
• Turning ON the breaker opens the flap, then
closes it again. (This is a normal procedure.)
NOTE
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them
once in about every two weeks.
Please note
• The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
• Use the air conditioner in the following conditions.
Mode
COOL
HEAT
DRY
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
Operation Manual
" or "
" button rap-
Operating conditions
Outdoor temperature:10 to 46˚C
Indoor temperature: 18 to 32˚C
Indoor humidity:
80% max.
Outdoor temperature:–10 to 20˚C
Indoor temperature: 10 to 30˚C
Outdoor temperature:10 to 46˚C
Indoor temperature: 18 to 32˚C
Indoor humidity:
80% max.
ECONO
TEMP
POWERFUL
MODE
FAN
QUIET
MOLD PROOF
ON
OFF
TIMER
Recommended temperature setting
For cooling:26°C – 28°C
For heating:20°C – 24°C
If operation is continued out of this range
• A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of the outdoor unit only.)
• Condensation may occur on the indoor unit and drip.
• A safety device may work to stop the operation.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
ON/OFF
SWING
SENSOR
2
CANCEL
1, 3
Instruction
185

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents