Daikin E-Series Service Manual page 210

SiAU18-715
2.2.10 MOLD PROOF Operation
MOLD PROOF Operation
MOLD PROOF operation is a function which reduces the spread of mold by using Fan mode to lower
the humidity inside the indoor unit.
To set MOLD PROOF
operation
1. Press and hold the MOLD PROOF
button for two seconds.
• " " is displayed on the LCD.
To cancel MOLD PROOF
operation
2. Press and hold the MOLD PROOF
button for two seconds one more
time.
• " " disappears from the LCD.
NOTE
• MOLD PROOF operation will operate for approximately one hour after dry or cooling mode
is turned off.
• This function is not designed to remove existing dust or mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER.
Operation Manual
ECONO
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
QUIET MOLD PROOF SENSOR
ON CANCEL
OFF
TIMER
Instruction
1, 2
197