Hitachi UX Twin Nozzle Service Manual page 70

5 Trace data (TRACE.TXT）
No. Code
1 001
2 009
3 003
(1) Output contents of Trace data
- Code
- Sequence name
- Date and Time
- Information
Code
001 Power turned on time
002 Current time change
003 Select message
004 Clear Fault/warning log
005 Set Viscosity
006 Excitation V-ref.
007 Serial number change
008 Unmatched model key
009 CM clock
010 Restore
011 Ink shelf life
012 Input LotNo.
013 Upgrade-key is short
014 Reserved
(2) Output example of the code/Description of the code
Code Sequence name
001 Power turned on time
Record timing: When the power is turned on
Logging contents: Time of [CCPU]
Code Sequence name
002 Current time change
Record timing: When Current time is changed on Date/Time setup screen
Logging contents: Settings of Before change/After change of [Current time], [Calendar time control]
[Output Example of Trace data]
Sequence name
Power turned on
2018/08/22
time
CM clock
Select message 2018/08/22
: Refer to the code in the table below.
: Refer to the sequence name in the table below.
: Refer to respective record data.
: Refer to respective logging content.
[Code number and sequence name]
Sequence name
2018/08/28
2018/08/28
and [Clock system]
Date Time
9:20:00
9:25:35
Code
015
016
017
018
019
020
021
022
023
024
025
026
027
Date Time
8:15:40
Date Time
8:15:40
2-48
Information
[CCPU],2018/08/22,9:20:10,
[TCPU],2018/08/22,9:20:10
0001, Normal (screen)
Sequence name
Ambient temp. upper lim.
Excitation V-ref. (Max)
Unmatched language key
Upgrade recovery
Time of preparing for printing
Reserved
Ink Drop Charge Rule
Reserved
Print Overlap Fault Check
Alarm display
The Radio Law is approved
Tag reading of cartridge is
approved
Reserved
Information
Information
, 2010/07/21,16:00:03,
[Calendar Time control], ,
Same as Current time,
[Clock system],24,24