Hitachi UX Twin Nozzle Service Manual page 244

Subsection
Faults – Print-stop type
6.3
6.3.1a
(N1)Ink Drop Charge Too High
6.3.1b
(N2)Ink Drop Charge Too High
6.3.2 Barcode Short On Numbers
6.3.3 Shutdown Fault
6.3.4 Count Overflow
6.3.5
Print Overlap Fault
6.3.6
Print Head Cover Open
6.3.7
Improper Sensor Position
6.3.8 Target Sensor Fault
6.3.9 Target Spacing Too Close
6.3.10
Print Data Changeover In Progress S/M/V
6.3.11
Blank Print Item
6.3.12
Excessive Format Count
- Communication Buffer Fault
6.3.13
Internal Communication Error C/T/M
6.3.14 Invalid Data Change Timing
6.3.15 Invalid Count Data Change Timing
6.3.16 Invalid Print Start Timing
6.3.17
Ink Shelf Life Information
6.3.18
Makeup Shelf Life Information
6.3.19
Free layout printing failure
6.3.20 Print Data Changeover Error C/T/M
6.3.21
Ink Level Sensor Broken 1､3
6.3.22
Makeup Level Sensor Broken 1､4
6.3.23 Vision sensor Connection Error
Name
6-2
Remarks
Refer to the Technical Manual
"5.9. Communication Buffer"
.