Hitachi UX Twin Nozzle Service Manual page 91

and time displayed.
(16) Set or adjust manually the items in the table below.
No. Item
1 Calibrate touch screen
coordinates
2 Touch screen setup
3 Selection of ink type
4 Nozzle diameter setting
5 Excitation adjustment
6 Viscometer calibration or
Viscosity coefficient input
7 Adjustment of auto phase
gain value
8 Excitation voltage setting
9 Readjustment of auto phase
gain value
10 Editing print data
11 Setting of substitution rules
12 Creating a User pattern
13 User environment setup
14 Setting the Date and Time
Setting Communication
15
environment
Setting the Password
16
Reference manual
Instruction manual
"7.4 Touch screen coordinate correction"
Instruction manual "6.3 Set up the touch screen"
"2.2 System environment setup"
"2.2 System environment setup"
"2.3.1 Excitation adjustment"
"2.6.1 Calibration of viscometer" or input ink viscosity
coefficient on "2.10 Unit information"
"2.3.4 Auto phase gain adjustment"
Technical manual "6.10 Excitation V adjustment "
"2.3.4 Auto phase gain adjustment"
Instruction manual "4. Creation and printing of message."
Instruction manual
"4.10.3 Print by substituting a different character for the
date (Substitution rule)"
Instruction manual "7.3 Creating a user pattern"
Instruction manual "6.1 Setting the user environment"
Instruction manual "6.2 Setting a Date and Time"
Technical manual "5 Communication"
Technical manual "3.2 Setting functions which can be
performed"
3-15