Hitachi UX Twin Nozzle Service Manual page 74

Logging contents: Settings of Before change/After change of [Print Overlap Fault Check]
Code Sequence name
024 Alarm display
Record timing: When setting of Alarm display was changed on Periodic replacement parts
management screen
Logging contents: Settings of Before change/After change of [Alarm display]
Code Sequence name
The Radio Law is
025
approved
Record timing: When setting of "The Radio Law is approved" was changed on System environment
setup screen
Logging contents: Settings of Before change/After change of [The Radio Law is approved]
Code Sequence name
Tag reading of cartridge
026
is approved
Record timing: When the setting of "Tag reading of cartridge is approved" was changed on
System environment setup screen.
Logging contents: Settings of Before change/After change of [The reading of cartridge is approved]
Date Time
2018/08/28 8:15:40
Date Time
2018/08/28 8:15:40
Date Time
2018/08/28 8:15:40
2-52
Information
Disable, , Enable
Information
No, , Yes
Information
No, , Yes