Hitachi UX Twin Nozzle Service Manual page 302

6.3.19a (N1)Free layout printing failure
(N1)Free layout printing failure
Delete the specific print items or Decrease the Ink drop use
rate. ( ex. 1/2→1/3)
Does the fault recur?
6.3.19b (N2)Free layout printing failure
(N2)Free layout printing failure
Delete the specific print items or Decrease the Ink drop use
rate. ( ex. 1/2→1/3)
Does the fault recur?
[ SUPPLIMENT ]
When the print format is set to Free layout, the printing may NOT be completed depending on the
data amount being created, of the print items or characters. In this case, warning of "Free layout
printing failure" will be displayed. For the details of the Free layout, refer to " 4.8 Set print format
(Free layout) " in Instruction Manual.
No
Yes
Resume the
operation.
No
Yes
Resume the
operation.
6-60