Hitachi UX Twin Nozzle Service Manual page 170

4 Remove Motor connection connector and Tube (Mark: AA) in Recovery pump
unit.
5 Holding the drive unit by hand, remove the fixing screw (1 piece) of Recovery pump unit
Fixing screw
6 Pull the Recovery pump unit forward.
Pull forward
Motor connection connector
Recovery pump unit
Mark: AA
Fixing screw
4-36
CAUTION
If the ink was accidentally
spilled, quickly wipe it off
with wiping paper, etc. In
addition, do not close the
maintenance cover until you
confirm that the wiped part
completely get dry.
Recovery pump unit
.