Specifications - Honeywell VISTA-128FBPN Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
VISTA-128FBPN CONTROL
Physical:
Electrical:
Primary Power:
Backup Battery:
Alarm Power:
Aux. Standby Pwr
Total Power
Standby Time:
Fusing:
Main Dialer
Line Seize:
Ringer Equivalence:
FCC Registration No.:
TLM Threshold
Formats:
Compatible Receivers
5140DLM BACKUP DIALER MODULE
Physical:
FCC Registration:
18"H X 14-1/2"W X 4.3"D
From ADEMCO No. 1451 Transformer with enclosure; rated 18VAC, 72VA.
12VDC, 12AH min to 34.4AH max. lead acid battery (gel type).
12VDC, 1.7A max. for each Notification Appliance Circuit.
12VDC, 1A max.
Combined auxiliary standby and alarm currents must not exceed 2.3A.
24 hours with 1A aux standby load using 34.4AH battery.
Battery input, auxiliary and Notification Appliance Circuits are protected using PTC
circuit protectors. All outputs are power limited.
Double Pole
0.7B
AC3-USA-68192-AL-E
Good line when tip-to-ring voltage greater than approximately 25V (13 when blue
jumper cut) or when handset current greater than approximately 10mA. Bad line
when both voltage and current below these levels.
ADEMCO High Speed, ADEMCO 4 + 2 Express, ADEMCO Low Speed, ADEMCO
Contact ID, Sescoa and Radionics Low Speed
7810iR-ent
MX8000
2.75"H X 4"W X 1"D
Mounts on VISTA-128FBP main PC board shield using standoffs supplied.
Connects to VISTA-128FBP main PC board J3 header using ribbon cable supplied.
AC3-USA-62628-MO-N
A P P E N D I X

Specifications

C
C-1