Honeywell VISTA-128FBPN Installation And Setup Manual page 14

Item Feature
1*61 Abort Verify
Zone Auto Stay Arm or
Programming Occupied Premises
Auto Stay
Zone, Zone
type 04 has
this feature
enabled by
default
Zone
Abort Window (for
Programming non-fire zones)
(Abort
Window
Enable)
Zone Swinger Suppression
Programming Enable
(Swinger
Suppression
Enable)
Zone Fire Alarm
Programming Verification
Tamper
Option
- Exit Time and
Progress
Annunciation/Disable
for Remote Arm (Not
Evaluated for SIA
CP-01)
- Cancel Window
- Cancel Annunciation
- Keypad displays
"Alarm Cancel" when
report is received
- Programmable Cross
Zoning Time
User Duress Feature
Authority
Level 6
* Programming at installation may be subordinate to other UL requirements for the intended application.
** In accordance with UL standards, the combined Entry Delay time and Abort Window cannot exceed 1
minute.
xiv
Range
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 = no abort window
1 = yes, use abort
window according to *88
selection
0 = no suppression
1 = yes, suppress alarms
according to *84
selection
For Zone Response
Type 16 (Fire) tamper
selection must be set to
"0"
Always Enabled
5 minutes
NA
Both zones must be
faulted within 5 minutes
NA
Shipping SIA Requirement*
Default
Enabled Enabled
1 (Enabled) Enabled
1 = yes Yes (all non-fire zones)
Yes (enabled) Yes (enabled (all zones))
Disabled Enabled unless sensors
can self verify
Enabled Enabled
Enabled Not required to be
programmable
Enabled Enabled
Per Per walk path in protected
Manufacturer premises
Disabled Disabled