Honeywell VISTA-128FBPN Installation And Setup Manual page 94

VISTA-128FBPN Installation and Setup Guide
If Compass does not have an account already created,
and the panel is defaulted; the installer enters Code
#89, enters the unattended phone number, account
number, primary phone number, and then triggers the
unattended call. The panel calls and connects to
Compass; then Compass does an upload, and
disconnects (if this option has been selected at the
station – otherwise Compass will download the default
account data). A new account "??????-FFFF" will be
created.
For unattended download to work, the Receiver Group
and Primary Phone number have to be entered into
Compass.
The following items must be programmed for
unattended download:
To access this mode, enter Installer Code + [#] + [89]. The following prompt appears:
PROMPT
Unattend. Phone
1 = YES 0 = NO 0
Unattend. Phone 1
Unattended Acct#
1 = YES 0 = NO 0
Unattended Acct#
15-15-15-15
Primary Phone
1 = YES 0 = NO 0
Primary Phone 0
Quit ?
1 = YES 0 = NO 0
Trig. Unattended
1 = YES 0 = NO 0
An unattended download may be initiated by the installer or end user at any time by entering User Code + [#] + [1].
7-2
EXPLANATION
Press 1 to enter the unattended phone number.
Enter the telephone number of the download software modem.
Enter up to 17 digits, 0-9; A key = ✳ ✳ ✳ ✳ , B key = #, C key = 2-Sec. Pause. Do not fill unused spaces. Press the
✳ key to accept the phone number and exit.
Press the # key to exit without changing any data.
The system displays the Quit menu prompt. Press 1 to exit the Installer Unattended Program Mode, or 0 to
continue to the next prompt.
Press 1 to enter the unattended account number.
Enter a 3-or 4-digit (depending on report format) account number 00-09; B-F (11-15). Each number requires
a 2-digit entry so as to allow entry of hexadecimal digits (B-F). If a 3-digit account number is to be used,
enter digits in the first 3 locations, and enter 00 in the last location.
Press the ✳ to exit without changing any data.
The system displays the Quit menu prompt. Press 1 to exit, or 0 to continue.
Press 1 to enter the primary phone number.
Enter the primary central station telephone number.
Enter up to 17 digits, 0-9; A key = ✳, B key = #, C key = 2-Sec. Pause. Do not fill unused spaces. Press the
D key accept the phone number and exit.
Press the ✳ to exit without changing any data.
The system displays the Quit menu prompt. Press 1 to exit, or 0 to continue.
Enter 1 to quit the Installer Unattended Program Mode. Enter 0 at the "Quit ?" prompt to return to the first
menu prompt, "UNATTEND. PHONE".
Enter 1 to initiate the unattended download at this time. Otherwise enter 0.
NOTE: The ADEMCO Compass Downloader must be in Unattended Mode.
• The account number (field ✳32)
•
Primary central station telephone number (field
✳33)
• The download telephone number (field ✳35)
• Unattended Mode (enable in field ✳54.)
NOTE: The default for field ✳54 is enabled (1).
Installer Unattended Program Mode
The Installer Unattended Program Mode allows the
installer to program fields ✳32, ✳33, and ✳35 without
entering the normal program mode.
In response to the displayed menu selection, press 0
(NO) or 1 (YES). Pressing 0 displays the next choice in
sequence.