Download Print this page

Honeywell VISTA-128BPT Overview

Interfacing lutron radiora 2 security systems
Hide thumbs

Advertisement

Interfacing Lutron RadioRA 2
Systems with
®
Honeywell Vista-128BPT Security Systems
revision A
RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems
Page 1

Advertisement

loading

  Related Manuals for Honeywell VISTA-128BPT

  Summary of Contents for Honeywell VISTA-128BPT

  • Page 1 Interfacing Lutron RadioRA 2 Systems with ® Honeywell Vista-128BPT Security Systems revision A RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 1...
  • Page 2 RadioRA 2 offers energy savings, convenience, and ambiance that the homeowner can enjoy every day. Required components In order to interface RadioRA 2 with a Vista-128BPT security panel, you will need the following items: • RadioRA 2 system installed • RadioRA 2 programming software version 5.0 or higher.
  • Page 3 Wiring RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 3...
  • Page 4: Programming Overview

    Table 3 provides a timeline illustrating how the RadioRA 2 system will automatically respond to various security commands throughout the day. Note: If the Honeywell Vista-128BPT system has no partitions, use phantom buttons associated with partition 1. See Table 2 for the phantom button to partition mapping.
  • Page 5 98 + 99 Exterior Flash, Interior Full Intrusion Night 98 + 99 Exterior Flash, Interior Full 100 + 98 Emergency, Exterior Flash Emergency Night 100 + 98 Emergency, Exterior Flash RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 5...
  • Page 6 Entry, foyer, kitchen lights on to room scene Welcome Single/Multi- room scene Goodnight Evening light levels Close Set Back Away Timeclock Timeclock mode Mode Set Back Away Mode Reserved for future use RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 6...
  • Page 7 Entry, foyer, kitchen lights on to room scene Welcome Single/Multi- room scene Goodnight Evening light levels Close Set Back Away Timeclock Timeclock mode Mode Set Back Away Mode Reserved for future use RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 7...
  • Page 8 Table 3: Security Programming Timelines When configured according to this tech tip, the RadioRA 2 system will automatically respond to commands from the security keypad as outlined in the tables below. RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 8...
  • Page 9 RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 9...
  • Page 10: Appendix 1: Programming The Phantom Buttons

    Once the project has been designed in the RadioRA 2 programming software, select the “Program” tab (1) and then find the Main Repeater using the “Selected Device Location” drop-down menu (2). RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 10...
  • Page 11 Next, select the desired button from the “Phantom Button” drop-down menu (3). RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 11...
  • Page 12 Finally, choose the appropriate “Selected Button Type” (4) and program devices and levels (5). Remember: you must also complete the activation and transfer steps for the programming to take effect RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 12...
  • Page 13: Appendix 2: Serial Programming Options For Automation Applications

    • 1*79 Home Control Event Types (Enter 1 in each home control event type) • 1*80 Enter 1 to improve automation performance by disabling fault/restore messages over the automation port. RadioRA 2 Interfacing with Honeywell Vista-128BPT Security Systems Page 13...