Basic Wiring Example; Electrical Installation, Control Cables - Danfoss FC 300 Design Manual

6. How to Install

6.3.8. Basic Wiring Example

1.
2.
Default settings:
18 = Start, Par 5-10 [9]
27 = Stop inverse, Par 5-12 [6]
37 = safe stop inverse

6.3.9. Electrical Installation, Control Cables

6
6.12: Diagram showing all electrical terminals without options.
Terminal 37 is the input to be used for Safe Stop. For instructions on safe stop installation, refer to the section
Safe Stop Installation in the FC 300 Design Guide.
* Terminal 37 is not included in the FC 301 (Except the FC 301 A1, which includes Safe Stop).
Terminal 29 and Relay 2 are not included in FC 301.
124
Mount terminals from the accessory
bag to the front of the FC 300.
Connect terminals 18, 27 and 37 (FC
302 only) to +24 V (terminal 12/13)
MG.33.B9.22 - VLT ® is a registered Danfoss trademark.
FC 300 Design Guide