Motor Connection - Danfoss FC 300 Design Manual

FC 300 Design Guide 6. How to Install
Line power connection for frame sizes A1, A2 and A3:
Line connector A5 (IP 55/66) Enclosure
6
When the disconnector is used (A5 enclosure), the PE must be mounted on the left side of the
drive.
Line connection B1 and B2 (IP 21/NEMA Type
1 and IP 55/66/ NEMA Type 12) enclosures
Line connection C1 and C2 (IP 21/ NEMA Type
1 and IP 55/66/ NEMA Type 12) enclosures
The power cables for line power are usually non-shielded cables.

6.3.3. Motor Connection

111
MG.33.B9.22 - VLT ® is a registered Danfoss trademark.